Diaper Packing Bag Making Machine Small Diaper Packaging Machine Baby Diapers Bags for Machine Package

• Customization: Available
• After-sales Service: Available
• Warranty: Available
• Model NO.: JWC-NK350
• Product Object: Baby
• Designed Speed: 400PCS/Min
• Production Speed: 300PCS/Min
• Computer Control Panel: Yes
• Product Specification: S, M, L, XL
• Automatic Grade: Automatic
• Certification: CE, ISO
• Condition: New
• Diaper Machine Color: Ivory White
• Machine Direction: to Be Defined
• Machine Power Source: 380V/50Hz
• Process: Baby Diaper Machine
• Usage: 98%
• Type: Baby Diaper Machine
• Transport Package: Transparent Film for Baby Diaper Machine
• Specification: S, M, L, XL
• Trademark: JWC
• Origin: China
• HS Code: 84418090
• Production Capacity: 30 Sets

Product Description

High speed Baby Diaper Making Machine
Model: JWC-NK350



PRODUCT DRAWINGS

Main technical Parameters

1	Design speed	400pcs/min
2	Working speed	300-350pcs/min
3	Qualified rate	≥ 97% (exclude the wastage due to theglue applicators and materials splicing joint)
4	Efficiency	≥ 85%
5	installation capacity	≥180KW
7	Electricity	380V ±5%,50HZ
8	Wire	Three phases four wires 380V/50Hz  (ground wire) 3X120mm³+1X50mm³+1X25mm³
9	Air pressure	6 kg/cm2   ≥0.6mpa
10	Total weight	45tons
11	Machine size	26.5×6×4.5 M(L×W×H)
12	Working space	29×8×6 M (L×W×H)
13	Machine color	Rice white ,can be changed by order
14	Product size	S,M,L,XL
15	Containers	4X40HQ

Machine main parts brand

	Name	Brand	Origin
1	Servo motor	Mitsubishi	Japan
2	Auto web guider	FIFE	USA
3	Touchable screen	Banner	USA
4	PLC controlling system	Mitsubishi	Japan
5	Sensor	Banner	USA
6	Safety production	Schneider	France
8	Cutter raw material	M7	USA
9	Gear (according to usage)	HRB/BEM/NSK/SKF	China/Germany/Japan/Sweden
10	Timing belt	Optibelt or Gates	Germany/USA
11	Low voltage electronic	Schneider	France
12	Temperature controlling system	Omron	Japan
13	Pressure regulating valve	Airtac	Chinese Taiwan
14	Pneumatic element	Airtac	Chinese Taiwan
15	Solenoid valve	Airtac	Chinese Taiwan
16	Moisture separator	Airtac	Chinese Taiwan

Machine Standard Configuration:
1.Machine frame structure and main characters

1. Reasonably solid square steel frame: Panel 25mm thick, adopt specular paint, 6 surfaces processing, solid cage with 60 * 60mm square steel in module design, the base frame with square tube 120mm × 120mm, 18mm thick bottom plate, 6 surface processing also ,widening after gearbox for repair. Spliced type main board by screw, make sure the high efficiency .
2. The main air suction bucket is installed with negative pressure display; the air scoop driven wheel is installed with quick fixture to facilitate the removal of the belt; the lower side of the conveyor belt above the material is installed with support plate to prevent the polymer and foreign matters from falling and polluting the lower material (the belt specification is labeled for maintenance)

2. Crusher system

3. Fluff forming system

4. SAP feeding system

5. Bottom tissue feeding, roll diameter φ800mm

6. Upper tissue, roll diameter φ800mm

7. Fluff core wrapped by upper and bottom tissue, also can be wrapped by one whole piece tissue

8. ADL feeding, roll diameter φ800mm
       
9. Fluff core inner cut device 1 set,adopt frame type structure, increase the cutter life

10. Leak cuff unit

11. Hydrophilic nonwoven supply, roll diameterφ800mm

12. Side tape supply:

13. Three pieces complex, two sides fixing unit, adhesion pressing

14. Bottom film supply

15. Frontal tape supply:

16. Elastic waistband supply

1. surface layer, absorption core, bottom film pressing
2. product arc shape die cut
3. pressing unit(Y shape roller)
4. product vertical tri-fold
5. pressing unit(Y shape roller)
6. transmission unit

23 . final cut unit

1. horizontal fold transmission unit
2. horizontal fold unit
3. product transmission unit

27. auto rejection exit(pneumatic)
28. horizontal stacker transmission
Servo driving horizontal stacker adopts double pusher and double exits. It press 25% and speed is 35-40bags/minute. Each push pieces range is 12-36pieces/push. (Normally 12-18pcs)
Note: the stacker is not included into the main machine. Customer needs to choose it or other packing ways

29. Driving system

1. Adopt several three axis transmission controlling, main raw materials unwinding driven by frequency control, to guarantee the precision and stability of the machine in high speed, and can realize not change any transmission parts to change the product's size, can directly set on PLC, easy to operate and maintain
2. All cutter racks adopt with CNC processing, guarantee the precision of bade and prolong the cutter's lifetime
3. Cutter adopts universal joint coupler transmission
4. Stressed timing belt is widen

30. Air supply

1. Vacuum, drum former, dust and wastage collection during production process adopt with several sets air pump and positive pressure blower
2. Air supply is set on the top of machine, made by stainless steel drawing tube, reduce the static electricity, high pressure blower unified air supply, pressure can be adjusted
3. Air tube is set on the top of machine, unified conveyed by galvanized pipe, connect necessary distributing pipe at the nearest place, neatly arrangement